New Submissions Are Not Currently Being Accepted
Samples sent after April 10, 2024 will be put on hold.
Viewing desktop version: Switch to Mobile
O-DSMT
Sold as: O-DSMT
ID: 11090
Result Photo Detail Photo Detail Photo Detail Photo
ID: 11090
Name: O-DSMT
Other Names:
UniqueCode:More infoUnique Lookup Code is an alphanumeric string created by the submitter and included with the sample so anonymously submitted samples can be positively identified as the submitter's sample. BZ13Z
Marquis:More infoThe Marquis Test is a reagent field test conducted by placing a drop of reagent liquid onto a small sample of the material being tested. The chemicals in the reagent react differently with different chemicals, turning a variety of colors based on the what is in the material being tested. Red Brown
Mecke:More infoAs with the Marquis Test, The Mecke Test is a reagent field test conducted by placing a drop of liquid reagent onto a sample of the material in question. Mecke reagent is primarily used for the identification of heroin and other opiates. Brown (grey-yellow)
Mandelin:More infoThe Mandelin Test is a reagent field test conducted by placing a drop of liquid reagent onto a sample of the material in question. Mandelin is primarily used for the detection of ketamine and PMA. It is a mixture of ammonium metavanadate and concentrated sulfuric acid. Green to Purple
GC/MS:More infoThe GC/MS Lab Test  
Test Date: Aug 26, 2021
Pub. Date: Aug 26, 2021
Src Location: Online
Submitter Loc: Stoneham, MA
United States
Color: White
Size: 300 mg
Data Source: DrugsData
Tested by: DDL
Lab's ID: 21080083
Sold as: O-DSMT
Expected to be: 98% pure, not contaminated
Description
Chunky white powder in baggie.
Note
Regarding '98% pure':

A reminder that DrugsData is not allowed to provide quantitative results for samples it analyzes, because our lab is constrained by rules set by the US DEA. Inert diluents, fillers and binder can not be reported even if they might be present. This means 'purity' can't be confirmed, either.
Problem
Please don't send samples this large to DrugsData.

It's important that samples submitted to this testing program be no more than 200 mg of material (ideally 20 to 50 mg). Keep in mind that just enough to *half* fill a capsule is more than enough. There is no advantage to sending more material, and samples that are too heavy may be delayed or require additional payment.

See how to send in a sample for testing.